Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 78 -
Assigning External Page ID via PC-DBA (continued)
3) Select the groups you want to assign to the selected port.
• A checked box indicates that the group is assigned to the currently selected port. If a box is unchecked,
that group is unassigned.
When all assignments have been made to the current port:
4) Click the Update button to enter and save your settings into the database on your local disk.
• Repeat the above steps for other page ports.
When all assignments have been made to all ports (as needed):
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
Once all database changes have been completed:
6) Perform a SEND to copy your new database to the DX-120 switch system memory.
ASSIGNING EXTERNAL PAGING VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Specify the Paging Group
You need to select the paging group to be Used by the tenant group for the external paging port
From the DB Item Select screen (follow steps 1 through 3 above)
4) Enter 04-12.
5) Press save to display the External Pager.
6) Press show to display the Pager ID.
• The only valid choice is 1.
7) Press 1 to confirm.
Assigning External Page ID via the DET (continued on next page)