Programming instructions
- 75 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Programming CID Names and Assignments Table (continued)
PROGRAMMING CID NAMES AND ASSIGNMENTS TABLE VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 04-10 to enter CID Names and Assignments Table programming.
5) Press save.
6) Press show to advance to the Assignment for CID Name Table screen.
7) Select the tenant number.
• Valid entries are 1 to 3.
• The default is 1.
8) Press show.
9) Decrease or increase (if there is sufficient room) the number of caller ID names in the table.
10) Enter 04-10-1-01.
11) Press chg if you want to increase the number of Caller ID numbers allowed for tenant group 1.
• The system then automatically increases the amount of caller ID names allowed, counting by 10.
• The range of allowable speed dials is 0 to 100.
• The default is 100.
OR
Press next to display the Decrease screen (now go to step 12).
OR
Enter 04-10-1-02 (now go to step 12).
12) Press chg to decrease the number of Caller ID numbers allowed for tenant group 1.
• The system then automatically decreases the amount of caller ID names allowed, in increments of 10.
13) Press next to display the Tenant screen.
14) Press chg until the next tenant number you want to program appears: 1~3.
15) Press show to display the current Caller ID number setting for that tenant.
OR
Enter 04-10-2-01.
16) Press save if you want to increase the number of Caller ID numbers allowed for tenant group 2.
OR
Enter 04-10-2-02.
17) Press save if you want to decrease the number of Caller ID numbers allowed for tenant group 2.
Programming CID Names and Assignments Table via the DET (continued on next page)