Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 72 -
Programming CID Names and Assignments Table
This table stores information used by the DX-120 when dialing outgoing calls. Such information includes any special
entries used when dialing (e.g., local area codes, country and international country codes), as well as any names
displayed during those calls. The system stores caller identification information for 100 calls in this call table. While
reviewing the calls, you will have the option to dial the number, obtain more information for the particular call, or delete
the call.
• The following conditions apply when programming the caller ID table:
- You must properly program the local area code and long distance prefix so the system can accurately re-dial
the CID number from the caller ID table.
- If no name is delivered from the telephone company, the system displays the number only.
- Any digital speaker phone user can review the caller ID table if the attendant password is known, but the table
can be reviewed by only one telephone at a time.
- You can exit the caller ID call table mode at any time.
• When programming the caller ID table, enter the following:
- International prefix (typically not required in the USA or Canada).
- Country code (typically not required in the USA or Canada).
- Long distance prefix (usually 1).
- Local area codes (enter them as the prefix if the local phone company uses 10 digit dialing).
HINT
See “Programming Caller ID Codes and Local Calling Areas” on page 264.
PROGRAMMING CID NAMES AND ASSIGNMENTS TABLE VIA PC-DBA
From the PC-DBA main screen:
Programming CID Names and Assignments Table via PC-DBA (continued on next page)