Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 68 -
Programming Speed Dial Numbers via PC-DBA (continued)
Once you have assigned a maximum number of system speed dials to each extension:
10) Click on the desired speed dial the in the System SPD scroll list.
• The appropriate line will also be highlighted in the scroll list above) from the DIR # field.
11) Click in the SPD. No. field and type the number you wish to associate with this speed dial.
• Use special characters as required.
- Pause = P
- Flash = / (forward slash)
- Speed Numbering Chaining = @ + next speed number (500-699).
12) Enter the group number you want associated with this speed dial number.
• Valid choices are from 1 to 8.
• The default is 1.
13) Click to move the number into the scroll list.
• The default for all system speed dials is blank.
• Use this same procedure to program as many system speed dial numbers as needed (up to the limit
you assigned for each extension).
When you are finished:
14) Click the Update button to store the settings into the database on the local disk.
15) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
16) Perform a SEND to copy your new database to the DX-120 switch system memory.
Programming Speed Dial Numbers (continued on next page)