Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 62 -
Setting Up Pre-Programmed Messages (continued)
SETTING UP PRE-PROGRAMMED MESSAGES VIA THE DET
You can set up both Outgoing and Premise Preprogrammed messages (see field descriptions under step 2 on previous
page):
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen..
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see 27).
3) Press show to display the DB Item Select screen.
Setting Up Outgoing Messages
From the DB Item Select screen (using steps 1 to 3 above):
4) Enter 04-07-01-01.
5) Press save to display Preprogrammed Messages – Outgoing (Text)
Message – 1.
6) Press next (if necessary) to advance to the next preprogrammed message.
7) Press chg to enter a new message for the selected preprogrammed message.
8) Use the chart and the dial pad keys to enter the new message. When finished:
9) Press save to store the settings.
Repeat steps above for additional messages.
10) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Pre-Programmed Messages via the DET (continued on next page)