Programming instructions

- 61 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Setting Up Pre-Programmed Messages via PC-DBA (continued)
1) Go to ProgrammingXSystem ResourceXPreprogrammed Message to display the Preprogrammed
Message screen.
2) Enter information in the fields as described below:
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy your new database to the DX-120 switch system memory.
Setting Up Pre-Programmed Messages (continued on next page)
In this field... enter...
Outgoing Message 1
• The first standard message you want to have available for
extension users when sending a message to another
extension.
• Specify the contents of outgoing messages 2 through 6 as
needed
Premises Message 1
• The first standard message you want to have available for
extension users to leave on their extensions when they must
leave the company premise.
• Specify the contents of premises messages 2 through 6 as
needed.