Programming instructions
- 57 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Setting Up Ring Scheme (continued)
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
PROGRAMMING RING SCHEME VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 08-01.
5) Press save to display the Ring Scheme programming screen.
6) Press chg until you see the ring scheme setting you want to use.
• Valid options are 0 - 9 (see table on page 54).
• The default is 3.
7) Press chg until the alarm play time (in seconds) you want to use displays.
8) Press back or next to continue programming.
OR
Exit programming (see “Exiting Database Administration” on page 27).