Programming instructions

- 49 -
DX-120 Programming Manual BASIC SYSTEM PROGRAMMING TASKS
Setting System Time, Date, and/or Hour Mode
The DX-120 system provides a built-in time clock to track system time for certain features.
NOTE
If you check this in PC-DBA, what you are seeing is the current time on your PC, not
the current time on the switch.
SYSTEM TIME CLOCK DETAILS
Features that can use the built-in system clock include system night service mode change, SMDR, alarm clock –
system, automatic CO line ringing, extension, and time and date display at executive speakerphones.
• This clock is battery-protected from power failure.
• You can change the system time at any DET, using the attendant password.
• You can also choose what time format (standard 12-hour time or 24-hour time) the system uses to display the time
at DETs.
• The following conditions apply to the hour mode.
- The system does not display “AM” and “PM” indications.
- When programming time-related features, use 24-hour format.
- SMDR output is in 24-hour format regardless of the settings of hour mode.
SETTING SYSTEM TIME, DATE, AND/OR HOUR MODE VIA PC-DBA
SETTING THE HOUR MODE
From the PC-DBA main screen:
Setting theHour Mode via PC-DBA (continued on next page)