Programming instructions

- 39 -
OVERVIEW
The system features allow you to control system administration and to assign system resources. The DX-120 provides
programmable features that allow you to establish these various settings.
BASIC SYSTEM PROGRAMMING TASKS
CAUTION
Database changes reside only on your computer. When you have finished making all
changes to the database, perform a SEND operation to download the new database to
the DX-120 switch.
• Assign the attendant extension for each tenant group - see page 40
• Assign the system reminder for each tenant group - see page 45
• Set up the system time, date, and hour mode - see page 49
• Set up the ring scheme - see page 55
• Name each CO line - see page 58
• Set up the pre-programmed incoming and outbound messages - see page 60
• Program speed dial numbers - see page 64
• Set Caller ID in the CID Names and Assignments table - see page 72
• Establish the music source for the each tenant group - see page 83
• Assign the external pager a tenant group - see page 77
• Establish Loud Bell Setting - see page 80
• Assign the DSS port owner - see page 89
• Set up the optional internal modem - see page 93
• Select the PC-DBA transmit rate - see page 95
• Select the SMDR transmit rate - see page 97
• Set up/modify the numbering plan you want to use - see page 103
• Set the daylight savings time feature - see page 287
• Set the user passwords and names for extensions - see page 387
• Specify the letter type - see 476
SECTION 4 - PROGRAMMING SYSTEM RESOURCES
DX-120 Programming Manual