Programming instructions

- 439 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Set Up Directory/Extension Swapping
As part of the Flexible Numbering Plan in the DX-120 system, you can exchange extension directory numbers from one
port to another.
Use this feature to simplify moves and changes of extensions at any specific location. When you swap
extension directory numbers from one port to another, the system moves the associated programming along with the
extension number.
EXAMPLE
Suppose the employee at port 011, extension 111 has to work out of another office for
the day—and the other office contains port 004, extension 104.
Using the extension
swapping features, you can switch the two extension numbers for the day without
having to re-program both ports.
Extension 111 would then ring at port 004 (in the second office) while extension 104
would ring at port 011 (in the first office).
You could keep the port assignments this
way indefinitely, or you could switch it back the following morning.
NOTE
You can only swap extension directory numbers with valid extension directory
numbers (already defined in the numbering plan).
SETTING UP DIRECTORY/EXTENSION SWAPPING VIA PC-DBA
From the PC-DBA main screen:
Setting Up Directory/Extension Swapping via PC-DBA (continued on next page)