Programming instructions

- 437 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Setting Up Extension Ring Level
• You can adjust the ringing level and ringing volume at each digital speakerphone. There are five levels of ringing
available (0-4).
• When an extension is busy on a call, the system automatically rings incoming intercom and CO line calls at the
lowest ring volume setting regardless of the level set at the extension.
When the extension is idle, incoming calls
ring at the loudness level set by the user.
• The following conditions apply to assigning ring levels.
- You can adjust ringing levels from the lowest level (0) to the highest level (4).
- The CO line ringing settings overrides settings set at the extension.
- The system displays the current setting on the LCD as you adjust ringing levels.
- The system plays the highest setting and lowest ringing levels as an indication that you cannot further adjust
this volume level.
• While the extension is idle, extension users can press the Volume button (up or down) to adjust the ringing level.
- The default ringer volume setting is level 2.
HINT
Also see “Assigning Ring Type for the CO Line” on page 134.