Programming instructions

- 425 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Setting Up Call Forward – Extension Predefined via PC-DBA (continued)
When you are finished:
4) Click the Update button to store the settings into the database on the local disk.
• Use the procedure shown above to set call forwarding parameters for other extensions
When you are finished:
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING UP CALL FORWARD – EXTENSION PREDEFINED VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Specifying forwarding destination for a Wrong Number Condition:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 01-XXX-29 (where XXX is the extension: 101~204).
5) Press save to display the Wrong Number screen for the extension you specified.
6) Press chg.
7) Enter the extension number or UCD group number to which you want to forward wrong number calls from
this extension.
• The default is none.
8) Press save.
9) Press next to display the Busy Destination screen.
OR
HINT
Set the Wrong Number option for other extensions (as needed) using the steps
above.
Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Call Forward – Extension Predefined via PC-DBA (continued on next)