Programming instructions

- 421 -
DX-120 Programming Manual BASIC EXTENSION PROGRAMMING TASKS
Setting Up Paging Privileges via PC-DBA (continued on next page)
5) Click the Update button to store the settings into the database on the local disk.
• Enable/disable paging privileges for other extensions (as needed) using the steps above.
When you are finished:
6) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
7) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING UP PAGING PRIVILEGES VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Setting the Paging Active option:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 01-XXX-17 (where XXX is the extension: 101~204).
5) Press save to display the Paging Allow screen.
6) Press chg to specify whether or not you want to this extension to be able to page to paging groups.
• Valid options are Y or N.
• The default is Y (yes) - allow paging from this extension.
HINT
Set the Paging Active option for other extensions (as needed) using the steps above.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Paging Privileges via the DET (continued on next page)