Programming instructions

BASIC EXTENSION PROGRAMMING TASKS DX-120 Programming Manual
- 418 -
Setting the OHVA Active Option (continued )
7) Press next for the OHVA Accept screen (now go to step 6 in “Setting the OHVA Accept Option:” below).
OR
HINT
Set the OHVA Active option for other extensions (as needed) using the steps above.
Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the OHVA Accept Option:
From the DB Item Select screen (see steps 1 through 3 on page 417):
4) Enter 01-XXX-15 (where XXX is the extension: 101~204).
5) Press save to display the OHVA Accept screen.
6) Press chg to specify whether or not you want this extension to receive OHVA from other extensions.
• Valid options are Y or N.
• The default is Y (yes) - allow OHVA to be heard on this extension.
OR
HINT
Set the OHVA Active option for other extensions (as needed) using the steps above.
Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).