Programming instructions

SHORTCUTS THAT HELP YOU WORK FASTER DX-120 Programming Manual
- 34 -
Copy the Programmed CO Line Setup via PC-DBA (continued)
Copy All Lines in a Pickup Group
2) Locate the Group area under Extension Copy.
3) Select the extension number you want to use as a baseline from the dropdown list in the Ext DIR No. field.
• You can enter any valid extension number in the system.
• There is no default.
4) Select the pickup group number (from the Pickup Group field) into which you want to copy the baseline
programming (i.e., any valid pickup directory number).
5) Click on Copy to make the specified copy.
• Enter any other pickup group numbers as needed using the steps above.
• If needed, you can enter another source extension directory number to copy from, and continue the
process for other pickup groups.
Now... continue on to step 6 on the next page.
When all extensions or pickup group settings are copied:
6) Click the Update button to enter your settings into the database on your local disk.
7) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
8) Perform a SEND to copy the database changes to the DX-120 switch system memory.
COPYING BASELINE EXTENSION SETUPS VIA THE DET
PROGRAM THE CO LINE SETUP TO BE COPIED
“Section 5 - Programming C.O. Lines” for detailed information about programming C.O. lines
COPY THE PROGRAMMED CO LINE SETUP
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display a prompt for
the password.
2) Enter the DB Admin password.
Copy the Programmed Baseline Extension Setups via the DET (continued on next page)