Programming instructions

BASIC EXTENSION PROGRAMMING TASKS DX-120 Programming Manual
- 406 -
Setting Up Monitoring Privileges via PC-DBA (continued)
4) Click the Update button to store the setting in the database on the local disk.
• Use the procedure shown above to set monitoring for other extensions as needed.
When all assignments have been made:
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
Once all database changes have been completed:
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING UP MONITORING PRIVILEGES VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 01-XXX-07 (where XXX is the extension number: 101~204).
5) Press save to display the Monitor Class programming screen for the extension you specified.
6) Press chg to until you see the monitor class of service you want to use for this extension.
• Valid choices are classes 0 through 9 (where 0 is the highest monitoring COS and 9 is the lowest).
• The default is 5.
7) Press the volume UP button to return to the DB Item Selection screen.
• Assign monitoring services to other extensions (as needed) using the steps above.
OR
8) Press the Hold button to return to the previous menu level.
OR
Exit programming (see “Exiting Database Administration” on page 27).