Programming instructions

- 33 -
DX-120 Programming Manual SHORTCUTS THAT HELP YOU WORK FASTER
Copy Baseline Setups (continued)
COPYING BASELINE EXTENSION SETUPS
You can use this database feature to quickly copy the various programming and settings for one extension to other
extensions. Copying these setups requires two separate procedures whether you program via PC-DBA or by DET:
You must:
A) Program the Baseline Extension Setup to be copied
B) Copy the programmed Baseline Extension Setup - Setups can be copied one line at a time or several lines at a
time
COPYING BASELINE EXTENSION SETUPS VIA PC-DBA
PROGRAM THE BASELINE EXTENSION SETUP TO BE COPIED
See page “Section 10 - Programming Extensions” on page 385 for information about programming baseline
extensions.
NOTE
When using group copy, all extensions you want to receive the programming must be
programmed for the same pickup group.
From the PC-DBA main screen:
1) Go to ProgrammingXSystem ApplicationXConfiguration Copy to display the Configuration Copy screen.
Copy the line(s) as needed.
Copy Individual Extension Settings
2) Locate the Individual area under Extension Copy.
3) Select the extension directory number you want to use as a baseline from the dropdown list in the Ext DIR
No. field.
• You can enter any valid extension number in the system.
• There is no default.
4) Select the extension directory number (from the Ext DIR No. field to the right of the arrow) into which you
want to copy the baseline’s programming (i.e., any valid extension).
5) Click on Copy to copy the specified settings.
• Enter any other extension numbers as needed using the steps above.
• If needed, you can enter another source extension number to copy from, and continue the process for
other extensions.
Now... continue on to step 6 on the next page.
OR
Copy the Programmed CO Line Setup via PC-DBA (continued on next page)