Programming instructions

BASIC EXTENSION PROGRAMMING TASKS DX-120 Programming Manual
- 386 -
BASIC EXTENSION PROGRAMMING TASKS
To program the extensions in the system, perform the following tasks for each extension in the system.
Setup Alternate Line IDs - see page 181.
Assign a passwords and user names to the extension - see page 387
Assign the extension to a tenant group - see page 391
Assign the extension to a pickup group - see page 394
Assign the extension to a paging group - see page 397
Assign a class of service to the extension - see page 400
Set up the Monitor classification - see page 404
Set up intrusion capabilities - see page 407
Set up warning tones, incoming call drops, outgoing call drops - see page 411
Set up Off Hook Voice Announce (OHVA) - see page 415
Enable/disable paging - see page 419
Set up external call forward - see page 423
Set up SMDR output - see page 427
Assign RAD devices - see page 429
Set up port type - see page 430
Set up CO line assignment - see page 433
Set up receive assignments - see page 435
Set up extension ring level - see page 437
Perform directory/extension swapping - see page 439
Configure Single Line Telephones (SLTs) - see page 438
Assign feature buttons - see page 442
HINT
Also see...
“Shortcuts that Help You Work Faster” on page 29
“Resetting an Extension to the Default Set” on page 37.