Programming instructions

- 383 -
DX-120 Programming Manual PROGRAMMING OPTIONAL INTERNAL DIGITAL VOICE MAIL
B - Setting up the UCD Group in the Voice Mail Table for Internal VM
After you change the UCD group, you need to then set it up in the Voice Mail table.
SET UP THE UCD GROUP IN THE VOICE MAIL TABLE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXExtension ApplicationXVoice Mail Table to display the Extension Application Voice
Mail Table screen.
2) Select the tenant group for which you want to program voice mail.
3) Select the voice mail table to reference the UCD group you want to use for the hunt group (e.g., 24 as it
was set in step 2 on page
381).
NOTE
The system ignores all other fields on this screen because you are using DX-120
Voice Mail (vs. a third party voice mail system).
When you are finished:
4) Click the Update button to store the settings into the database on the local disk.
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Set up the UCD Group in the Voice Mail Table (continued on next page)