Programming instructions

- 381 -
DX-120 Programming Manual PROGRAMMING OPTIONAL INTERNAL DIGITAL VOICE MAIL
Basic Internal Voice Mail Programming Tasks
A) Specify the UCD group used as the voice mail group, as necessary
B) Set the voice mail table to reference the UCD group you want to use for voice mail
C) Activate Automated Attendant
A- Specifying the UCD Group for Internal VM
The first thing you’ll need to do when setting up Internal voice mail is program the UCD group members - see
“Programming UCDs” on page 345 for additional details.
SPECIFYING THE UCD GROUP VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXExtension ApplicationXUniform Call Distribution to display the UCD: Parameters
screen.
2) Select the UCD Group you want to program as the VM hunt group (e.g., usually 24) from the Hunt Group
field.
3) You will also need to make this setting in the Voice Mail table (see “Set up the UCD Group in the Voice
Mail Table via PC-DBA” on page 383)
4) Click the Members button to display the member list for the selected hunt group (e.g., 24).
Specifying the UCD Group via PC-DBA (continued on next page)