Programming instructions

- 375 -
DX-120 Programming Manual PROGRAMMING THIRD PARTY VOICE MAIL
Set the Call Handling Digits via the DET (continued)
Programming VM Table – Suffix Digit:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-03 (where X is the Tenant Group: 1~3).
5) Press save to display the Suffix screen.
6) Press chg.
7) Enter the suffix numbers you want the system to use to identify a call as the mailbox owner.
8) Press save to store the setting.
9) Press next to continue programming the VM Table - Record Digit (now go to step 6 in the next section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming VM Table – Record Digit:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-04 (where X is the Tenant Group: 1~3).
5) Press save to display the Record Digit screen.
6) Press chg.
7) Enter the numbers you want the system to use to activate recording for this mailbox owner.
8) Press save to store the setting.
9) Press next to continue programming the the VM Table - Delete Digit (now go to step 6 in the next section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Set the Call Handling Digits via the DET (continued on next page)