Programming instructions

PROGRAMMING THIRD PARTY VOICE MAIL DX-120 Programming Manual
- 374 -
Set the Call Handling Digits via the DET (continued)
Programming VM Table – Prefix Table – CO Recall:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-02-07 (where X is the Tenant Group: 1~3).
5) Press save to display the CO Recall screen.
6) Press chg.
7) Enter the prefix numbers you want the system to use to identify a call as a specific CO line recalling.
8) Press save to store the setting.
9) Press next to continue programming the Prefix Table - UCD Overflow (now go to step 6 in the next
section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming VM Table – Prefix Table – UCD Overflow:
From the DB Item Select screen (see steps 1 through 3 on page 370):
4) Enter 06-02-0X-02-08 (where X is the Tenant Group: 1~3).
5) Press save to display the UCD Overflow screen.
6) Press chg.
7) Enter the prefix numbers you want the system to use to identify a call as a UCD Overflow Announcement.
8) Press save to store the setting.
9) Press next to continue programming the VM Table - Suffix Digit (now go to step 6 in the next section).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Set the Call Handling Digits via the DET (continued on next page)