Programming instructions

PROGRAMMING THIRD PARTY VOICE MAIL DX-120 Programming Manual
- 366 -
Program the UCD Group Members via PC-DBA (continued)
4) Select the digital channel directory number as a member in the first field (i.e., field 1).
• The VM hunt group is the new UCD group you selected and programmed with the digital channel
members.
• Use the steps above to continue programming all digital channel extensions currently connected to the
voice mail.
5) Click the Close button to exit the current screen and return to the UCD programming main screen.
When you are finished programming the UCD group:
6) Click the Update button to store the settings into the database on the local disk.
7) Click the Close button to exit the current screen and return to the PC-DBA main screen.
Once all database changes have been completed:
8) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Now, set the Call Handling Digits in the Voice Mail Table (see page 367)
PROGRAM THE UCD GROUP MEMBERS VIA THE DET
From the DB Item Selection screen:
1) Enter 06-01-XX-04 (where XX is the group number: 01~24).
2) Press show to display Member #1 of the UCD group you specified.
3) Press chg.
4) Enter the extension directory of the analog port to program into this member.
5) Press save to store the setting.
6) Press next.
• Continue programming all voice mail ports as member of this UCD group, as needed, using the steps
above.
7) Press the volume UP button to return to the DB Item Selection screen.
Now, set the Hunt Group and Call Handling Digits in the Voice Mail Table (see page 370)