Programming instructions

- 351 -
DX-120 Programming Manual PROGRAMMING UCDS
Setting the Name for a UCD Group via the DET (continued)
HINT
If you want to set names for other UCD groups, press the volume Up button to return
to the DB Item Selection screen, and repeat the steps in this section.
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Members for a UCD Group:
From the DB Item Select screen (see steps 1 through 3 on page 349):
4) Enter 06-01-XX-04 (where XX represents the UCD group: 01~24).
5) Press save to display the Member screen for the specified UCD group.
6) Press chg.
7) Enter the extension directory number of the extension you want to assign as a member of the specified
UCD group.
8) Press save to store the setting.
9) Press next if you want to assign other members to this group.
• Follow steps 6 through 8 for each member you want to assign.
OR
Press the Hold button to return to the previous screen level.
• You can then press next to display the Hunt Method screen, then go to step 6 in “Setting the Hunting
Method for a UCD Group:” below.
OR
HINT
If you want to set members for other UCD groups, press the volume Up button to
return to the DB Item Selection screen, and repeat the steps in this section.
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming UCDs via the DET (continued on next page)