Programming instructions

BASIC TOLL RESTRICTION PROGRAMMING TASKS DX-120 Programming Manual
- 338 -
Setting the Account Code Length and Password (continued)
SETTING THE ACCOUNT CODE LENGTH AND PASSWORD VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 05-02.
5) Press save to display the Account Code programming screen.
6) Press show to display the account code LENGTH screen (now go to step 6 in “Setting the Account Code
length:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Account Code length:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 05-02-01.
5) Press save to display the length screen.
6) Press chg.
7) Enter the number of digits you want to use for account codes.
• Valid options are 2 - 8 digits.
• The default is 3.
8) Press save to store the setting.
9) Press next to display the account code Password screen.
10) Enter the appropriate ID Number (001~600).
11) Press show to display the Password screen (now go to step 6 in “Setting the Password:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Account Code Length and Password via the DET (continued on next page)