Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 288 -
Setting the Daylight Savings Time Feature (continued)
SETTING THE DAYLIGHT SAVINGS TIME FEATURE VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-49.
5) Press save to display the Daylight Savings Time screen.
6) Press chg to specify whether or not you want to enable the Daylight Savings Time schedule.
• Valid choices are Y (yes) or N (no).
• The default is N (N) - do NOT use Daylight Savings.
7) Press save to store the setting.
8) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27.