Programming instructions

- 281 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Fax Ring Time via PC-DBA (continued)
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING FAX RING TIME VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-37.
5) Press save to advance to the Fax Ring Time field.
6) Press chg until you see the number of seconds you want the system to ring a fax line before dropping the
call.
• Valid options are 10, 20, 30, 40, 50, and 60.
• The default is 10 seconds.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27.