Programming instructions

- 279 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Up SMDR Call Output via the DET (continued)
Specifying the SMDR Call Output for Account Codes:
From the DB Item Select screen (see steps 1 through 3 on page 278):
4) Enter 03-31-03.
5) Press save to display the SMDR Output screen for Account Codes.
6) Press chg to specify if you want the account code to appear in the SMDR field.
• Valid choices are Y (yes) or N (no).
• The default is Y (yes) - include account codes.
7) Press next to display the Output selection screen for Call Start.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Specifying the SMDR Call Output for Call Start:
From the DB Item Select screen (see steps 1 through 3 on page 278):
4) Enter 03-31-04.
5) Press save to display the SMDR Output screen for Call Start.
6) Press chg to specify if you want the account code to appear in the SMDR field.
• Valid choices are Y (yes) or N (no).
• The default is Y (yes) - include Call Start information.
7) Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming the (CIL) Call Information Log serial port baud rate (CIL X_RATE)
From the DB Item Select screen (see steps 1 through 3 on page 278):
4) Enter 04-17.
5) Press save to display the SMDR CIL port transmission rate setting.
6) Press chg until the appropriate baud rate appears.
• Valid options are 1200, 2400, 4800, 9600, and 19200.
• The default is 9600.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).