Programming instructions

- 263 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Establishing Warning Time via the DET (continued)
SPECIFYING CALL WARNING TIME VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-09-01 to set the outgoing call duration time.
5) Press chg to select the maximum amount of time you want to allow for limited outgoing calls.
• Valid choices are 1 through 30 minutes.
• The default is 5 seconds.
6) Enter 03-09-02 to set the incoming call duration time.
7) Press chg to select the maximum amount of time you want to allow for limited incoming calls.
• Valid choices are 1 through 30 minutes.
• The default is 5 seconds.
8) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).