Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 258 -
Specifying Call Duration Time
This option allows you to specify the length of time before an outgoing call is displayed on the phones LCD and used in
the SMDR.
In other words, the time set here is the number of seconds that the software waits after the telephone user
dials the last digit of the outgoing number (i.e., the start of the call) before it displays the call information on the LCD
and records it in the SMDR.
BASIC SETTINGS
You can set the DX-120 to either:
• warn an extension that the time has expired, thereby advising the extension user to disconnect.
- In this mode, the system plays a warning tone repeatedly once the timer has expired.
• automatically disconnect the call moments after playing the warning tone.
ADDITIONAL SETTINGS
You determine what call length you want to allow and when you want the system to play the warning tones while
programming call handling. You then set the warming tones/call drops on or off while programming the individual
extensions.
HINT
Also see...
• See “Establishing Warning Time for Limited Call Lengths” on page 261.
• See “Setting up Warning Tones, Incoming Call Drops, Outgoing Call Drops” on page 411.
SPECIFYING CALL DURATION VIA PC-DBA
From the PC-DBA main screen:
Specifying Call Duration via PC-DBA (continued on next page)