Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 252 -
Enabling/Disabling System Speed Toll Check
The System Speed Toll Check feature allows you to instruct the system to perform a toll restrictions check on a system
speed dial.
Normally, system speed dials are exempt from the toll check while the DX-120 does perform toll restriction
checks on individual speed dials and processes the call accordingly.
EXAMPLE
Suppose your customer has a corporate office in Tampa, Florida, and a satellite office
in Houston, Texas.
Your client may wish to allow the corporate employees to call the
Houston office, even though long distance calls are prohibited in their class of
service.
To do this, you would set up a system speed dial for the corporate office
employees with system speed toll check disabled—since the Houston number is set
up on a system speed dial it is processed without a toll check.
Now suppose another customer has a corporate office in Tampa, Florida, and a
satellite office in Honolulu, Hawaii.
This customer wants to allow the CEO to call
Honolulu but not allow the remaining employees to do so.
In this instance, you could
set up a speed dial for the CEO with system speed toll check enabled, and assign the
CEO a separate class of service whose toll restrictions include the ability to call
Honolulu.
The remaining employees’ class of service would disallow this toll call.
ENABLING/DISABLING SYSTEM SPEED TOLL CHECK VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXCall HandlingXFeature Control to display the Call Handling—Feature Control
screen.
Enabling/Disabling System Speed Toll Check via PC-DBA (continued on next page)
BASIC CALL HANDLING PROGRAMMING TASKS
DX-120 Programming Manual