Programming instructions

- 249 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Up Alarm Play Intervals (continued)
SETTING UP ALARM PLAY INTERVALS VIA THE DET
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-19.
5) Press save to display the Alarm Play screen.
6) Press chg to select the time you want the system to repeat the alert tone when the set alarm time is
reached.
• Valid options are 10~600 seconds, in 30 second intervals (10, 20, 30, etc.).
• The default is 30 seconds.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27)
Enabling/Disabling Hotel Feature
This feature allows the system attendant to administer certain system extension features to emulate hotel operations.
The system attendant can:
• Set extension wakeup calls via the Alarm Clock-Extension feature.
• Set extension status to Checked IN/Checked OUT/Clean such that the associated LED of DSS/BLF buttons for
the extension indicate the current status. In “Checked Out” and “Clean” modes, dialing at the extension is
restricted to intercom calls only.
HINT
If you have programmed a release key, you can use it to clear any active condition
(extension alarm clock mode, etc.) with one touch.
Enabling the Hotel Feature (continued on next page)