Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 244 -
Setting Conference Talk Time Intervals and Conference Tones (continued)
SETTING CONFERENCE TALK TIME INTERVALS AND CONFERENCE TONES VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Setting Meet Me Conference Time:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-38.
5) Press save to display Meet Me Conference.
6) Press chg to specify the length of time that you want the system to allow for Meet Me Conferences.
• The valid range is from 0 to 120 minutes, in 10 minute increments.
• The default is 0 (unlimited).
7) Press next to advance to External Call Forward Talk Time (now go to step 6 in “Setting the Conference
Tone Operation:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Conference Tone Operation:
From the DB Item Select screen (see steps 1 through 3 above):
8) Enter 03-23.
9) Press save to display Conference Tone.
10) Press chg to specify whether or not you want the system to play conference tones.
• Valid choices are yes or no.
• The default is yes.
11) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).