Programming instructions

- 243 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Conference Talk Time Intervals and Conference Tones via PC-DBA (continued)
From the PC-DBA main screen:
1) Go to ProgrammingXCall HandlingXFeature Control to display the Feature Control screen.
2) Select No, 2Lines, or 3Lines from the CO Line Conference field.
• The default is 3Lines.
3) Click the checkbox ( ) next to Conference Tone to place a check mark there to enable the Conference
Tone ( ).
• Clicking on this box toggles the setting between yes/enable (a checkmark ) and no/disable (no
checkmark ).
• The default is on (check mark).
When you are finished making the settings:
4) Click the Update button to store the settings into the database on the local disk.
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Setting Conference Talk Time Intervals and Confernce Tones (continued on next page)