Programming instructions

- 241 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Setting Conference Talk Time Intervals and Conference Tones
Conference is used to join telephone connections together. Meet Me Conference simplifies the setup process by
assigning designated system resources as conference destinations.
The result is eight separate conference locations
that are joined by dialing the location number.
Callers can easily be transferred to these locations; extension users simply dial the location number. Outside parties
can join the conference via the automated attendant simply by dialing the location number at the auto attendant
greeting.
• Other features that may be affected by conference talk times include the following:
- CO Line – Call Abandon
- Call Handling – CO Line Conference
- Call Handling – Talk Abandon Time
- System Application – Meet Me Conference Directory Number
NOTE
When Call Abandon (see page 129) is set to N for any CO line, you must set the Meet
Me Conference Talk Time (see page 244) to some value other than 0. This is the only
setting that will allow the CO line to be disconnected if Call Abandon is set to no.
SETTING CONFERENCE TALK TIME INTERVALS AND CONFERENCE TONES VIA PC-DBA
From the PC-DBA main screen:
Setting Conference Talk Time Intervals and Confernce Tones via PC-DBA (continued on next page)