Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 240 -
Programming External Call Forward (continued)
PROGRAMMING EXTERNAL CALL FORWARD VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Setting External Call Forward:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-33-01.
5) Press save to advance to ECF Service Mode.
6) Press chg to specify when the external call forward mode (time) is active.
• Valid choices are Never, Day, Evening, and Always.
• The default is Always.
7) Press next to advance to External Call Forward Talk Time (now go to step 6 in “Setting the External Call
Forward Talk Time:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the External Call Forward Talk Time:
From the DB Item Select screen (see steps 1 through 3 above):
8) Enter 03-33-02.
9) Press chg to specify how long you want the system to allow talk times for external call forward calls.
• Valid options are 5, 10, 20, 30, 60, and 120 minutes.
• The default is 5 minutes.
10)Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).