Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 230 -
Establishing SLT Hook Flash via PC-DBA (continued)
When both times have been set:
3) Click the Update button to store the settings in the database on your local disk.
4) Click the Close button to exit the current menu and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
ESTABLISHING START AND END OF SLT HOOK FLASH VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 03-14.
5) Press save to advance to the SLT Hook Flash programming screen.
6) Press next to display each SLT Hook Flash screen (see information in the following sections for setting
the Dialing Ratio).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Establishing SLT Hook Flash via the DET (continued on next page)