Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 220 -
Setting Up Hold Recall via the DET (continued)
Programming an EKT Hold Recall:
From the DB Item Select screen (see steps 1 through 3 on previous page):
4) Enter 03-13.
5) Press save to advance to EKT Hold Recall programming.
6) Press chg to select the length of time you want the system to allow a call to remain on hold until it recalls
it to the DET extension user’s phone.
• Valid choices range from 0 to 5.0 minutes.
• The default is 1.0.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Dial Wait Time and Dial Delay
The DX-120 allows you to specify the timing you want the system to use for dial wait and dial delay. Dial wait time is
how long the system waits before outputting DTMF tones on outgoing calls.
Dial delay is how long the system waits
after the extension user has gone off hook before presenting dial tone to the speaker/ear piece.
SETTING UP DIAL WAIT TIME AND DIAL DELAY VIA PC-DBA
From the PC-DBA main screen:
Setting Up Dial Wait Time and Dial Delay via PC-DBA (continued on next page)