Programming instructions

- 203 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Specifying Ring Abandon via PC-DBA (continued)
1) Go to ProgrammingXCall HandlingXTiming to display the Call Handling—Timing screen.
In the Ring Abandon field in the third column:
2) Select how long you want the system to wait for voltage (ring) from the CO trunk before dropping the call.
• Valid choices are 1 to 10 seconds.
• The default is 6 seconds.
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Specifying Ring Abandon via the DET (continued on next page)