Programming instructions

- 201 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Specifying Pause Time (continued)
SPECIFYING PAUSE TIME VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Programming the Auto Pause Insertion Time (used with PBX type CO line ports):
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-15.
5) Press save to display the PBX Auto Pause programming screen.
6) Press chg until the appropriate PBX Auto Pause Time appears.
• Valid options are from 0.5 to 7.0 seconds, in .5 second intervals.
• The default is 1.0 second.
Press the volume UP or Down to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Program the pause time (used with speed dial):
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-04.
5) Press save to display the Pause Time programming screen.
6) Press chg to view the pause time choices.
• Valid options are from 0.5 to 7.0 seconds, in .5 second intervals.
• The default is 2.0 seconds.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).