Programming instructions

- 193 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Programming Conference Calls via the DET (continued)
Program the Conference Tone Operation:
From the DB Item Select screen (see steps 1 through 3 on page 192):
4) Enter 03-23.
5) Press save to display the Conference Tone Operation screen.
6) Press chg until the appropriate Conference Tone operation displays (Y/N).
• The default is Y.
7) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Specifying CO Flash Time
The CO flash time determines what flash timing the DX-120 presents to the telephone company central office when the
user issues a hook-flash command while connected to a CO line.
This feature is a requirement when the DX-120 is
installed “behind” a Centrex or PBX system.
In these two cases, program the flash feature code as a Flexible Feature
Button for easy access.
If call waiting service is provided, the extension user can use the flash feature to answer a second incoming call while
connected to another outside party.
• Conditions for Setting the CO Flash Time
- The flash time is programmable from 100ms to 3000ms in increments of 100ms (1/10th of a second).
- When extension users enter the flash code at a DET, the phone displays CO Flash temporarily.
- Single line extension users must generate a hook-flash and then dial # 3 to generate a hook-flash on a CO
line.
- You can store the flash code in any speed dial location.
- You can store the flash code in the last number redial buffer. When you activate redial, a digital speakerphone
display shows a / to indicate the flash code.
• Other features that May Be Affected by the CO Flash Time
- Speed Dial (System and Station)
- Memo Pad
- Last Number Redial
- Automatic Redial
Specifying CO Flash Time (continued on next page)