Manualshelf

Programming instructions

ManualsBrandsVertical ManualsComputer equipmentEdge 120
191192193194195196197198199200
BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 192 -
Programming Conference Calls (continued)
PROGRAMMING CONFERENCE CALLS VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Programming the maximum number of CO lines that may be in a conference:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-01.
5) Press save to display the Conference Line screen.
6) Press chg until the appropriate value displays (NO/2LNS/3LNS).
• The default is 3 lines.
7) Press next to display the Unsupervised Conference Time screen (now go to step 6 in “Programming the
Unsupervised Conference Time:” below).
OR
Press the volume UP or Down to return to the DB Item Selection screen.
OR
Exit programming (see nte).
Programming the Unsupervised Conference Time:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-39.
5) Press save to display the Unsupervised Talk Time screen.
6) Press chg until the Unsupervised Conference Time displays the number of minutes you want to allow for
the unsupervised conference time.
• Valid entries are 0 to 120, in ten minute intervals (0,10,20, 30, etc.).
• The default is 0, which means unlimited unsupervised conference calls.
7) Press next to display the Conference Tone Operation screen (now go to step 6 in “Program the
Conference Tone Operation:” below).
OR
Press the volume UP or Down to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming Confernce Calls via the DET (continued on next page)