Programming instructions

DX-120 Programming Manual
Technical Manual - Volume II
Copyright © October, 2006 Vertical Communications, Inc.
All rights reserved. Unauthorized use of this document is prohibited.
Vertical Communications, Inc.
106 Cattlemen Road, Sarasota, FL 34243
[phone] or [phone]
-Notice-
Vertical Communications, the Vertical Communications logo and combinations thereof,
and Corporate Office are trademarks ofVertical Communications, Inc. Artisoft, TeleVantage, InstantOffice,
Comdial and Vertical Networks are registered trademarks of Artisoft, Inc.
All other brand and product names are used for identification only
and are the property of their respective holders.
.
DISCLAIMER
This manual has been developed by Vertical Communications, Inc. (the “Company”) and
is intended for the use of its customers, potential customers, and service personnel. The
information in this manual is subject to change without notice. While every effort has been
made to eliminate errors, the Company disclaims liability for any difficulties arising from
the interpretation of the information contained herein.
The information contained herein does not purport to cover all details or variations in
equipment or to provide for every possible contingency to be met in connection with instal-
lation, operation, or maintenance. Should further information be desired, or should partic-
ular problems arise which are not covered sufficiently for the purchaser’s purposes,
contact Vertical Communications, Inc.