Programming instructions

BASIC CALL HANDLING PROGRAMMING TASKS DX-120 Programming Manual
- 188 -
Basic Call Handling Programming Tasks (continued)
• Program auto redial - see page 232
• Set up external call forward - see page 237
• Set up conference talk time intervals and conference tones - see page 241
• Set up the camp on interval - see page 245
• Set up the alarm play intervals - see page 247
• Enable/disable the hotel feature - see page 249
• Enable/disable the system speed check - see page 252
• Enable/disable the TSI connection - see page 254
• Enable/disable the conference tone - see page 256
• Specify the call duration - see page 258
• Specify caller ID codes and establish the local area code - see page 264
• Enable/disable tenant calling per tenant group - see page 271
• Enable/disable SMDR call output - see page 274
• Set the fax ring time - see page 280
• Set the pre-defined call forward time - see page 282
• Program the recognition time interval - see page 285
• Set the hold abandon time interval - see page 291
• Set the unsupervised talk time - see page 294
• Program the auto attendant - see page 298
• Set the DISA access - see page 312
• Program the voice mail - see page 363
Ringing Line Priority
Ringing Line Priority is a system-wide feature that automatically connects incoming calls based on a predetermined
priority.
The ringing extension is automatically connected to the priority ringing facility, upon lifting the handset or
pressing the ringing button.
Ringing Line Priority can be overridden at the extension by first pressing a direct appearing line, CO line group, feature
button, or by dialing an intercom number on hook.
The following list shows the ringing line priority, from highest to lowest.
• Callback – extension
• Callback – CO line
• Recalling CO line call
• Transferred CO line call
• Incoming CO line call
• Incoming ICM call
NOTE
Ringing Line Priority is not a programmable feature on the DX-120. The information
provided below is provided for reference only.