Programming instructions

- 179 -
DX-120 Programming Manual PROGRAMMING FOR THE OPTIONAL T1 AND ISDN (T1/PRI) CARDS
Setting Up Alternative Line IDs (continued)
SETTING UP ALTERNATE LINE IDS (ALI) - VIA THE DET
FOR SYSTEMS WITH ISDN (T1/PRI) INSTALLATION ONLY
See Field Descriptions beginning on page 178 for more information about the settings via the DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
• You can also use steps from “Programming for a ISDN (T1/PRI) Card via the DET”
on page 167, to access the Translation Table.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 07-06.
5) Press save to enter Alternate Line ID programming.
6) Press show to display the Index screen.
7) Enter XXX (where XXX represents the appropriate table row number: 001~ 100).
8) Press show to display the Complete setting (now go to step 6 in “Setting the Calling / Answering Party
Number:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Calling / Answering Party Number:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 07-06-XXX-01 (where XXX represents the appropriate table row number: 001~ 100).
5) Press save to display the Complete setting.
6) Press chg if you want to change the setting to Y (i.e., Yes - if you want only the Number defined in this
entry to be sent to the Digital Trunk as the Calling / Answering Party Number).
• The default is N (No)
7) Press next to display the Number screen (now go to step 6 in “Setting the Calling / Answering Party
Number for the Extension” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up Alternative Line IDs (continued on next page)