Programming instructions

PROGRAMMING FOR THE OPTIONAL T1 AND ISDN (T1/PRI) CARDS DX-120 Programming Manual
- 172 -
Programming for the Translation Table via PC-DBA (continued)
2) Enter/select information for the fields as described below:
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Programming for the Translation Table via the DET (continued on next page)
IN THIS FIELD... DO THIS...
Incoming Enter the DID number for which you want to program incoming modes.
Day
Enter the number to which the Incoming digits are translated in Day Service
Mode.
• The Destination Number can be an Extension, Hunt Group. Max 4 digits
(0~9, *<wild card>) can be programmed.
• The default is “Null” for all entries.
Alt
Enter the number you want the C.O. to use for the Alt Mode, as needed.
• This setting is similar to the one made in the ‘Day’ field but it works for Alt
(Noon) Service Mode.
Eve
Enter the number you want the C.O. to use for the Eve Mode, as needed
• This field is similar to ‘Day’ field but it works for Night Service Mode.
DID Length
Select the number of digits of the DID you want the CO to send to the DX-120
when an incoming call is received.
• Valid selections are from 0-12 digits.
• The default is 3.
Interceptor
Select the extension that you want the C.O. to use when a matching DID can-
not be found in the Translation Table.
• The default is blank (none).