Programming instructions

- 171 -
DX-120 Programming Manual PROGRAMMING FOR THE OPTIONAL T1 AND ISDN (T1/PRI) CARDS
Setting Up the Translation Table
This information is used by the system to determine how to interpret incoming DID calls. You can program DIDs for
DAY, EVEning, and ALTernate modes for incoming T1 and ISDN (T1/PRI) calls.
HINT
Also see “Programming for an Optional T1 Card” on page 155 or “Programming for
Optional ISDN (T1/PRI)” on page 164 depending upon which card is installed or
being installed in the system.
SETTING UP THE TRANSLATION TABLE VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXC.O. Line ApplicationXTranslation Table to display the C.O. Line Application -
Translation Table screen.
Programming for the Translation Table via PC-DBA (continued on next page)