Programming instructions

BASIC CO LINE PROGRAMMING TASKS DX-120 Programming Manual
- 154 -
Setting Up Fax Detection via PC-DBA (continued)
2) Select a FAX Destination for each CO line port (4, 8, 12, or 16) at which you want faxes received.
• To do this, you will need to select the directory number of the analog port that is connected to the FAX
machine.
• Valid numbers include any analog extension port directory number.
• The default is NONE.
When you are finished:
3) Click the Update button to store the settings into the database on the local disk.
4) Click the Close button to exit the current screen and return to the PC-DBA main screen.
When you have finished all programming changes:
5) Perform a SEND to copy the database changes to the DX-120 switch system memory.
SETTING UP FAX DETECTION VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Enter 07-02-01.
4) Press save to advance to the first Fax Circuit Destination screen (i.e., circuit 803).
5) Press chg.
6) Enter the directory number of the analog port that is connected to the fax machine for this line.
7) Press save.
8) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).