Programming instructions

- 153 -
DX-120 Programming Manual BASIC CO LINE PROGRAMMING TASKS
Setting Up the Alternate CO Line Group via the DET (continued)
You can now program the next alternate route for this CO line group (if required) or skip to step 22:
21) Enter the alternate route to program (1 for first alternate, or 2 for second alternate) for this CO line group.
22) Press show.
Continue programming in the same manner.
When you are finished programming alternate CO line routes:
23) Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting Up FAX Detection
The DX-120 system has a standard FAX tone detection capability on the fourth port of each CO line board, that is, CO
line ports 4, 8, 12 and 16 have the circuitry required to detect “CNG” FAX tone.
When you program the system to receive a facsimile transmission on one of these CO line circuits, it automatically
answers the ringing line and waits for FAX tone.
If the system detects the FAX CNG tone it connects the call to the
facsimile extension you specify.
SETTING UP FAX DETECTION VIA PC-DBA
From the PC-DBA main screen:
1) Go to ProgrammingXC. O. Line ApplicationXFax Detection to display the Fax Detection screen.
Setting Up Fax Detection via PC-DBA (continued on next page)