Programming instructions

- 145 -
DX-120 Programming Manual BASIC CO LINE PROGRAMMING TASKS
Setting the Pre-Defined Call Forward No Answer via PC-DBA (continued)
2) Select the central office line you wish to assign.
• Available entries are 800 through 839.
• Entries 840 to 843 are for future use only.
3) Select the (Pre-CFW NoAns) directory number to which you want the system to forward unanswered calls
for this CO line.
• Valid directory numbers are as follows.
- extensions 101-204
- UCD numbers 410-433
- virtual number 700-729
- The default is blank.
4) Click the Update button to enter your settings into the database on the local disk.
• Use the procedure shown above to assign predefined call forward "no answer" (i.e., unanswered)
directory numbers to other CO lines.
When you are finished:
5) Click the Close button to exit the current screen and return to the PC-DBA main screen.
6) Perform a SEND to copy the database changes to the DX-120 switch system memory.
Setting the Pre-Defined Call Forward No Answer (continued on next page)